PowerDyne Bearing Press Puller for Installing and Removing or Replacing Bearings in Nylon Hub No Hub Aluminum or Metal Hubs Wheels Skate Tool for Roller Derby Speed Skating Skateboard Skaters by Riedell

PowerDyne Bearing Press Puller for Installing and Removing or Replacing Bearings in Nylon Hub No Hub Aluminum or Metal Hubs Wheels Skate Tool for Roller Derby Speed Skating Skateboard Skaters by Riedell

Installing or replacing your bearings is a cinch with the PowerDyne Bearing Press/Puller. Just follow the instructions below and you'll be back on the floor in no time! To use the puller, start with the handle up and the long pin down (sideways). Then put the wheel on the outside, push the handle down and it pulls the bearing out. Repeat to pull out the other bearing. To use the press, stand the pin up and put a bearing down on the pin. Next put the wheel with the outside of the wheel (usually the printed side) facing up and put another bearing on the pin. Tip the pin down (sideways) and carefully pull the handle down. You may have to guide the bearings a bit to get started. The aluminum hub wheels may be a bit trickier than the nylon hub or no hub wh eels. Do not use excessive force. A very small amount of silicone oil around the outside of the bearing usually helps ease them into the aluminum hub wheels.

This Best Selling PowerDyne Bearing Press Puller for Installing and Removing or Replacing Bearings in Nylon Hub No Hub Aluminum or Metal Hubs Wheels Skate Tool for Roller Derby Speed Skating Skateboard Skaters by Riedell tends to SELL OUT VERY FAST!!

If this is a MUST HAVE product, be sure to - Order Now to avoid disappointment

we already done the research and spend a lot of time for you. Click Here to find out where to get the best deal on PowerDyne Bearing Press Puller for Installing and Removing or Replacing Bearings in Nylon Hub No Hub Aluminum or Metal Hubs Wheels Skate Tool for Roller Derby Speed Skating Skateboard Skaters by Riedell